We service both air-source and ductless heat pump systems.
A heat pump stuck in one mode, or one that's iced over and won't defrost, gets diagnosed with the right tools for that specific failure mode.
If you're dealing with a system stuck blowing cold air in heating mode, an outdoor unit that's iced over and won't run its defrost cycle, or a system that switches modes but never actually reaches set temperature, you already know a heat pump that seems to be 'not heating' is often actually a reversing valve or defrost cycle problem, which a technician trained mainly on standard AC systems can easily misdiagnose.

Waiting rarely saves money and often turns a same-day repair into a longer, more involved job.
AAA Pro HVAC built its heat pump repair process around one idea: diagnose first, quote honestly, fix it right.
We're licensed, insured, and staffed with techs who've spent years specifically on heat pump repair, not general handyman work with an HVAC certificate bolted on.

Our techs are specifically trained on reversing valves, defrost boards, and auxiliary heat systems, not just general AC repair logic.
Heat pumps run in both summer and winter, so we treat heat pump failures as urgent regardless of season.
Auxiliary heat strip diagnostics are included in the same visit when relevant.
Refrigerant charge is verified against heat pump-specific specs, which differ from standard AC charging.
Every job starts with a real diagnosis, not a guess — here's the full scope of what our heat pump repair technicians handle across Buffalo, TX.
A stuck reversing valve is the single most common reason a heat pump gets stuck in one mode. This is one of the most requested heat pump repair calls we get across Buffalo, TX.
An outdoor unit that ices over and never defrosts usually points to a failed defrost thermostat or control board timing issue. Techs handling defrost cycle & control board repair carry the specific parts and tools this job calls for, not a generic kit.
We test heat strip elements and the relay controlling them separately. This is one of the most requested heat pump repair calls we get across Buffalo, TX.
Heat pump refrigerant charging follows different specs than standard AC systems, especially across heating and cooling modes. Techs handling refrigerant charge & leak detection carry the specific parts and tools this job calls for, not a generic kit.
We distinguish between the two before recommending any repair. This is one of the most requested heat pump repair calls we get across Buffalo, TX.
Indoor head unit and outdoor condenser are diagnosed as a connected system. Techs handling ductless heat pump system repair carry the specific parts and tools this job calls for, not a generic kit.

That detail determines which specialized tools ride along.
We confirm your Buffalo address and a realistic arrival window.
Flat-rate pricing follows the confirmed diagnosis.
Most reversing valve and defrost board repairs finish same-visit with parts carried on the truck.

System would only blow cold air no matter what mode I selected.
Turned out the defrost thermostat had failed, so it never actually triggered the defrost cycle.
They tested the relay separately from the strips themselves and found the actual fault fast.
Tech recognized it immediately as a defrost-related fault specific to that brand.

This is one of the most common and most misdiagnosed heat pump failures.
If the unit stays iced for more than an hour, that's worth a service call.
Heat pumps have a reversing valve, defrost cycle, and often auxiliary heat strips that standard AC systems don't have.
If auxiliary heat isn't kicking in properly, that's a specific fault we can test for.
These systems have their own fault-code patterns that our techs are trained to read.
Call for a live arrival estimate based on current demand.

Our heat pump repair crews are positioned throughout Buffalo, TX to keep response times realistic, not just promised.
☎ Call +1-866-805-8548 for Buffalo Service